Introduction
This metal detector series is a kind of new product designed and developed upon absorbing the overseas advanced technology and combining the actual conditions of the domestic customers.this product is widely applied for metallurgy,mine,power supply,coal picking,cement and chemical industhes,which can continuously detect the magnetic metal articles mixed in the non-metal materials,and indicate the metal articles in the mode of non-contacting.send the signal to the metal detecting & removing unit.thus remove the articles to improve the products' quality and make sure the safe operation of the equipmnents.
Features
- Steady performance and reliable operation for a long time.
- Can be used for magnetic and non-magnetic materials; It has strong suppression for the interrupt of the magnetic materials.
- Sensors removable,installation without belt disconnected.
- Provided signal delay circuit to be adjusted according to the belt speed and the iron removing position.
Main technical data
Overall dimension drawing lor a sensor
- Environment temperature: -10℃~50℃
- Relative moisture: <85%
- Supply power voltage:~220V±10%(50Hz
- Total power consumption<30W
- Belt speed: 0.8-2.5m/s
- Sensitivity =f20mm
Sensor overall dimension table
Metal Detector supplier, metal detecting equipment, metal detecting tools, metal detection
| Belt width |
A |
A' |
B |
B' |
C |
D |
| 500 |
880 |
680 |
640 |
500 |
810 |
130 |
| 650 |
1030 |
830 |
640 |
500 |
960 |
130 |
| 800 |
1180 |
980 |
640 |
500 |
1110 |
130 |
| 1000 |
1380 |
1180 |
640 |
500 |
1310 |
130 |
| 1200 |
1580 |
1380 |
640 |
500 |
1510 |
130 |
| 1400 |
1800 |
1600 |
640 |
500 |
1730 |
130 |
| 1600 |
2000 |
1800 |
640 |
500 |
1930 |
130 |
Pattern selection reference table
| Model |
JTC2-500A |
JTC2-650A |
JTC2-800A |
JTC2-1000A |
JTC2-1200A |
JTC2-1400A |
JTC2-1600A |
| Belt width(mm) |
500 |
650 |
800 |
1000 |
1200 |
1400 |
1600 |
| Sensible iron ball(mm) |
Φ20 |
Φ35 |
Φ40 |
Φ50 |
Φ60 |
Φ70 |
Φ70 |
Table for integrated metal detector and user's signal interface
| Model |
Interface signal |
Mental detector unit Number |
Note |
| Separating trounp Irons |
Separating metal itens |
Separating
trounp Irons |
Separating metal itens |
| CJKl-□/PLC |
- Ready for run
- Main loop error
- Detector error
- Separator running
- Detecting tramp irons
- Continuous tramp irons detecting
- Continous irons conveying bell stop interface
|
- Ready for run
- Main loop error
- Detector error
- Separator running
- Detecting tramp irons
- Missed metal detecting
- Missed metal conveying belt stop interface
|
1 set |
2 sets |
- The required signals can be connected into the control chamber upon the actual production situations by the customer.
- There are operating bothors and signal display in the operation box.
|
| GJK21-□/PLC |
2 sets |
4sets |
| GJK22-□/PLC |
Note:
- In column of "Interface signal",'[Separating tramp irons"refers to detect among the weak magnetic material and separate the irons." Separating metal items "refers to detect the magnetic metal(irons,etc)as well as non-magnetic metal(manganse steel,etc).The magnetic metal will be auto separated by the separator.The non-magnetic metal will only be manually separated after the material conveying belt comes to stop.
- Out put signal interface is passive contact." Belt stop" interface is a couple of often-open and often-closed contact.In principle,the other interfaces provide a couple of often-open contact.
